Tormek Sharpening Jigs


Tormek Sharpening |  Tormek Sharpening Jigs


Tormek Carving Kit  (Ref: 719433)

Tormek Carving Kit

Key Features

Tormek SVD-186 Gouge Jig

Full control over bevel angle and shape
Takes carving gouges up to 36mm wide and carving vee tools
Tormek LA-120 Profiled Leather Honing Wheel

For the honing and polishing of the inside of carving tools
Made of solid tanned leather
Two standard discs have a radius of 3mm (1/8") and a 60° tip
Tormek SVS-38 Short Tool Jig

For short carving tools and chisels
Also suitable for power carving tools

This package comprises a Tormek SVD-186 Gouge Jig, an LA-120 Profiled Leather Honing Wheel and an SVS-38 Short Tool Jig.

Tormek SVD-186 Gouge Jig

The Tormek SVD-186 can handle most carving gouges up to 36mm wide and carving V-tools. The jig gives you full control over bevel angle and shape. The SVD-186 and Tormek wetstone machine combination offers 3 crucial benefits. The Tormek water-cooled wheel results in a superior edge that is longer lasting and exact repeatability next time you need to sharpen your tool. A curved clamping disc ensures correct seating of your tool in the tool holder. The angle setting has a precise click feature making initial jig set-up easy. The SVD-186 fits all Tormek machines.

Tormek LA-120 Profiled Leather Honing Wheel

For the honing and polishing the inside of woodcarving gouges and V-parting tools, Tormek have developed a profiled leather honing wheel, made of solid tanned leather. The diameter of the larger wheel is 120mm (4.3/4"), which speeds up the honing process. The sharp profile for V-parting tools allows you to polish inside the acute angle. The discs have a radius of 3mm (1/8") and a 60° tip. The design has a large, deep space between the 2 profiles and therefore permits inside honing of wide tools or tools with deep profiles.

Tormek SVS-38 Short Tool Jig

From Tormek comes a jig for sharpening short carving tools and chisels down to 45mm long, including power carving tools (Bosch, Proxxon, AMT etc). Used with the Universal Support, the jig automatically holds your chisel square to the grindstone.

89.30 107.16


Quantity:  






Tormek Woodturner's Bench Grinder Conversion - PACKAGE DEAL  (Ref: 504087.)

Tormek Woodturner's Bench Grinder Conversion - PACKAGE DEAL

Package deal comprises the Tormek BGM-100, Tormek SVS-50 Multi-Jig, Tormek TTS-100 Turning Tool Setter and the Tormek SVD-185 Turning Tool Jig.

Tormek BGM-100
With the BGM-100 you can use Tormek jigs and setting devices on your bench grinder, giving you perfect control. The chosen shape and edge angle are precisely repeatable. The BGM-100 also allows the use of other Tormek woodturner's jigs in combination with a bench grinder such as the SVS-50 Multi-jig and SVD-110 Toolrest. The BGM-100 comprises a horizontal base, a Tormek universal tool support, fixing kit and complete instructions.

Tormek SVS-50 Multi-Jig
This is a very comprehensive jig which can be used equally well for turning and carving tools. There are two holders provided, one for turners' skew chisels, either oval or square section, from 13mm to 35mm wide, and the other for carvers' skew chisels, parting tools, roughing gouges and wide carving gouges up to 50mm wide. The jig is clamped to the tool and the angle is set by re-positioning the universal support in the horizontal base.

Tormek TTS-100 Turning Tool Setter
This unique turning tool setter enables exact replication of the edge on bowl and spindle gouges as well as on flat and oval skews with a straight or a curved edge. The setter works with the articulated Gouge Jig SVD-185 and the Multi Jig SVS-50. The strength of the setter is that it works irrespective of the stone diameter and always produces the same edge angle. Built-in settings give pre-determined edge geometries as recommended by experienced turners.

Tormek SVD-185 Turning Tool Jig
For sharpening bowl, spindle and fingernail turning gouges up to 25mm wide and, in its latest form, multi-tip scraper blades with mounting holes from 5mm to 8mm diameter. The benefits re-grinding a gouge to the fingernail form are two-fold: firstly, the risk of digging in is greatly reduced and, secondly, the increased length of edge of the fingernail shape makes the gouge far more versatile and controllable. The SVD-185 not only allows the grinding of an even, symmetrical shape but allows different lengths of side edges to be produced all with the same bevel angle. Each jig comes with a set of labels so that you can record the jig settings for each gouge for future reference.

124.75 149.70


Quantity:  






Tormek DBS-22 Drill Bit Sharpener  (Ref: 950970)

Tormek DBS-22 Drill Bit Sharpener

Fits all Tormek models
Restore completely worn drills as well as broken drills to a perfect shape
Sharpens drills from 3mm (1/8") to 22mm (7/8")
Drill holder and guides are made with the highest precision
Tormek sharpens with water cooling which is gentle on the steel
Creates a 4-facet point which gives the ideal cutting performance
The optimal point and clearance angle can be set according to requirements


The complex geometry of a drill bit point makes it very hard to free hand sharpen it correctly. The Drill Bit Sharpening Attachment DBS-22 makes it possible to sharpen drill bits on your Tormek Water Cooled Sharpening System with the highest precision. You create a 4-facet point which gives the ideal cutting performance. The optimal point and clearance angle can be set according to each drilling requirement in regards to drill size and material. You can restore completely worn drills as well as broken drills to a perfect shape.Unlike conventional drill bit sharpeners, Tormek sharpens with water cooling which is gentle on the steel. Overheating of the steel is usually not noticeable, but the consequences are that the drill will dull rapidly and may even break. By working with the laws of physics and cooling the edge continuously, the risk that the steel becomes overheated and loses its hardness or gets micro cracks is eliminated.With a 4-facet sharpening the chisel edge gets a point instead of being almost flat as on many drills. A 4-facet point will not walk and the thrust force required is considerably reduced compared to a conventional cone point drill. It generates less heat and the life of the drill is therefore also prolonged. The attachment can be set at any point angle between 90° and 150° and at four different clearance angles. This flexibility enables you to give the drill the geometry that works best for each drilling operation. You can for example minimize the burr, which occurs on the exit side of a drilled hole by increasing the point angle and decreasing the clearance angle.The drill holder as well as the guides are made with the highest precision to ensure that the lengths of the two cutting edges will be equal within close tolerances. This is an essential requirement so that the cutting edges will work equally and bore a round, straight hole, which is not larger than the drill diameter. Copes with drills from 3 mm (1/8") to 22 mm (7/8"). Fits all Tormek models.

148.76 178.51


Quantity:  






Tormek SVM-45 & 140 Knife Jigs  (Ref: 910088)

Tormek SVM-45 & 140 Knife Jigs

Long and short jigs for sharpening knives of various lengths
Adjustable to suit different blade thicknesses


Simple to operate jigs for sharpening knives of various lengths. The opening of the clamp can be adjusted to suit different thicknesses of blade and the handle is used to finely adjust the grinding angle. Once one side has been sharpened the jig can be flipped over to produce the same angle on the other side. The SVM-45 takes small knives down to a minimum of 70mm and the SVM-140, which has a longer clamping capacity, takes knives either with longer blades (over 120mm) or very thin blades (such as filleting knives). Can also be used for electric hand planer knives.

51.11 61.33


Quantity:  






Tormek SVM-140 Long Knife Jig  (Ref: 702085)

Tormek SVM-140 Long Knife Jig

This jig is made especially for long and thin knives. It works in the same way as the SVM-45 jig but it is wider and therefore gives more support to long and thin blades.

The jig comprises an adjustable clamp (1) for holding knives of any thickness and an adjustable stop (2). You adjust the jig to the knife thickness with the screw (3). You lock the tool by tightening the knob (4).

The jig rests on the Universal Support. The exact edge angle is set by rotating the stop or with the Micro Adjust on the Universal Support. The Universal Support is placed vertically for grinding towards the edge. PDF of a detailed instruction for the SVM-140 jig.

32.06 38.47


Quantity:  






Tormek SVM-45 Short Knife Jig  (Ref: 910089)

Tormek SVM-45 Short Knife Jig

The jig for knife sharpening comprises an adjustable clamp (1) for holding knives of any thickness and an adjustable stop (2). You adjust the jig to the knife thickness with the screw (3) and lock by tightening the knob (4).

The jig rests on the Universal Support. The exact edge angle is set by rotating the stop or with the Micro Adjust on the Universal Support.

The Universal Support is normally placed vertically for knife sharpening towards the edge. Short knives can also be ground away from the edge with the Universal Support placed horizontally. PDF Knife Jig SVM-45 Instruction.

21.75 26.10


Quantity:  






Tormek SVS-50 Multi Jig  (Ref: 910091)

Tormek SVS-50 Multi Jig

This patented jig consists of a housing (1) and two interchangeable seats: one closed, (2) and one open, (3). The seats can swivel and be locked with the screw (6) at any skew angle between 0° and 45°. Skew chisels have symmetrical bevels on both sides. With this jig you mount the tool only once for grinding both the bevels. By turning the jig upside down you can grind both of the bevels symmetrically.

The closed seat is for skew chisels. The tool is fixed with the side screw (4). The top screw (5) is not used.

The open seat is designed for tools which have the edge square across the shank. The tool is fixed with the top screw in the housing (5). As the seat can be turned, it can also be used for short skew chisels.

37.50 45.00


Quantity:  






Tormek SVS-38 Short Tool Jig  (Ref: 910090)

Tormek SVS-38 Short Tool Jig

The Tormek SVS-32 Short Tool Jig was developed for short woodcarving tools, butt chisels and tools for power carvers. The jig has two parallel flanges running on both sides of the Universal Support.

The technique achieved with this design ensures that at all times the jig - even when rotated - holds the tool square to the grindstone. This is a great advantage, as you can continuously concentrate on how the edge touches the grindstone or the honing wheel without having to worry whether the jig is square to the stone. PDF Short Tool Jig SVS-32 Instruction.

15.02 18.02


Quantity:  






Tormek SVH-320 Planer Knife Jig  (Ref: 910085)

Tormek SVH-320 Planer Knife Jig

For regrinding blades and knives of any length
Grinds blades identically


The Tormek SVH-320 Planer Knife Jig comprises support (1), blade holder (2) and allen key (3). In this attachment the tool is guided precisely and ground flat along its whole length to a pre-set fixed depth. This is not the case with the other Tormek jigs, where your hand decides where the grinding occurs and the depth of grinding. It is important that the grinding angle is set with great accuracy. If you follow the detailed step by step instructions carefully, you will be satisfied with the results. PDF Planer Blade Attachment SVH-320 Instruction.

102.82 123.38


Quantity:  






Tormek SVM-00 Small Knife Holder  (Ref: 504136)

Tormek SVM-00 Small Knife Holder

Key Features

Used in conjunction with the SVM-45 Tormek Knife Jig
SVM-00 holds the knife handle then clamps into the SVM-45
Allows sharpening of most small blades
The SVM-00 enables complete control of small knives
Sharpen knives of different shapes for whittling, chip carving and detail work
Sharpen narrow chef's knives, boning or fish filleting knives
Enables sharpening of small blades of folding knives

The new holder works with the Tormek Knife Jig SVM-45. Your knife’s handle, rather than the blade, mounts in the SVM-00 holder. The SVM-00 then clamps into the SVM-45. Using this system there is really no limit to how small a blade you can sharpen. Small knife blades are difficult to sharpen at the best of times. Normally sharpened free hand, consistent shape and edge angle are always a challenge. The SVM-00 opens up the ability to work with complete control on a wide range of small knives. You can now sharpen knives of different shapes for whittling, chip carving and detail work. The SVM-00 can also handle narrow chef’s knives like boning or fish filleting knives. You can even sharpen small blades of folding knives with perfect control.

18.61 22.33


Quantity:  






TORMEK SVD-186 GOUGE JIG  (Ref: 102132)

TORMEK SVD-186 GOUGE JIG

IN DETAIL

Use the SVD-186 for sharpening woodturning gouges (bowl, spindle and fingernail) to a razor like edge. The Tormek SVD-186 can also handle most carving gouges up to 36mm wide, carving vee tools and multi-tip scraper blades with mounting holes from 5mm to 8mm diameter. The SVD-186 and Tormek wetstone machine combination offers three crucial benefits. The water cooled wheel results in a superior edge, longer lasting and one that leaves a finer finish. The jig gives you full control over bevel angle and shape. The jig gives you exact repeatability next time you need to sharpen your tool. A curved clamping disc ensures correct seating of your tool in the tool holder. The angle setting has a precise click feature making initial jig set-up easy. The SVD-186 fits all Tormek machines.

KEY FEATURES

Results in a superior edge, longer lasting, leaving a finer finish
Full control over bevel angle and shape with exact repeatability
For sharpening woodturning gouges (bowl, spindle and fingernail)
Takes carving gouges up to 36mm wide and carving vee tools
Sharpens multi-tip scraper blades
Fits all Tormek machines

51.59 61.91


Quantity:  






Tormek SVD-185 Universal Gouge Jig  (Ref: 910084)

Tormek SVD-185 Universal Gouge Jig

Key Features

For sharpening various turning gouges and most carving gouges
Supplied with labels to record jig settings for each gouge

52.50 63.00


Quantity:  






Tormek SVA-170 Axe Grinding Jig  (Ref: 910081)

Tormek SVA-170 Axe Grinding Jig

A relatively simple jig that allows both bevels of an axe head to be ground at exactly the same angle over the full length of the edge (maximum head size 165mm). A nice solution to a problem often encountered when grinding by hand. You can of course, if you choose, have different bevel angles on each side by simply adjusting the height of the support - this is the sort of control that you can only get with a Tormek. PDF Axe Jig SVA-170 Instruction.

8.39 10.07


Quantity:  






Tormek SE-77 Square Edge Jig  (Ref: 102331)

Tormek SE-77 Square Edge Jig

Key Features

For sharpening plane blades and wood chisels
Unique design, tool sits squarely in the jig
Fine adjustment for a precise 90° edge
Allows sharpening a controlled camber on a hand plane blade
Clamp and sharpen Japanese chisels
Even clamping pressure for stability and security when sharpening
Safety stops keep the jig securely on the support bar
Comes as standard on the Tormek T-8

The patented SE-77 is the latest upgraded version of the original Tormek jig. For plane irons and wood chisels, its unique design makes mounting the tool squarely in the jig foolproof. Two small knobs on one side of the jig allow you to fine-tune the jig for a precise result and achieve a perfect 90°. These adjusting knobs also allow you to put a controlled camber on a hand plane blade. The jig's construction makes it possible to clamp and sharpen tapered chisels, for example Japanese chisels. A further enhancement is the moveable locking screw. This ensures the clamping pressure is even on both sides of your blade, guaranteeing greater stability and security when sharpening. Safety stops keep the jig securely on the Universal Support and prevent the tool from sliding off the grindstone. Max tool width 76mm(3"), max tool thickness 9.5mm3/8").

35.75 42.90


Quantity:  






Tormek SVP-80 Profile Knife Jig  (Ref: 701403)

Tormek SVP-80 Profile Knife Jig

Sharpens all shapes of moulding knives
Face is precision ground
Knife held in position with magnet & guiding pins
Sharpens all makes and shapes of moulding knives with 24/30/38mm between centres
Up to maximum width of 100mm
For different distances, extra holes can be drilled
Not suitable for knives without holes


The Tormek SVP-80 Profile Knife Jig attachment comprises a base (1), a knife holder (2), an extra Universal Support (3) with micro adjust (4) and two pairs of hollow pins (5 and 6) for the knife holder.

The base is mounted on this extra Universal Support and on the existing Universal Support of the machine. The base is locked with the screw (7). An arm (8), which is locked with an adjustable hand lever (9), stabilizes the construction.

The knife is placed on the pair of hollow pins on the knife holder. A magnet (13) keeps the knife in place. The holder has holes to fit various knife standards. Two pair of pins (Ø4 and Ø5 mm) come with the jig.

The knife holder (2) glides on the base (1), which has PTFE surfaces to minimise the friction. The knives are ground on the face. Adjusting the nut on the horizontal Universal Support sets the grinding depth. PDF Moulding Knife Attachment SVP-80 Instruction.

92.57 111.08


Quantity:  






Tormek SVX-150 Scissor Jig  (Ref: 910092)

Tormek SVX-150 Scissor Jig

The jig for scissors sharpening comprises a support plate (1) and a holder (2) with two clamps (3) for the scissors. Usually you use only the right clamp. For large scissors and garden shears you use both clamps.

You adjust the clamp to fit the scissors’ thickness with the screw (4). You lock the scissors by tightening the knob (5). The support plate has a sliding surface, so the holder with the scissors can easily be moved while it is pressed onto the plate.

28.84 34.61


Quantity:  






Tormek SVD-110 Toolrest  (Ref: 910083)

Tormek SVD-110 Toolrest

A universal toolrest that is easy to adjust and stays just where you set it. The wide plate is just the job for the sharpening of turning scrapers, carving scorps, inshaves, screwdrivers and re-truing of cabinet scrapers.

This Tool Rest is ideal for the grinding of turning scrapers and special tools for woodcarving, e.g. large scorps and inshaves. Also for cabinet scrapers and hollowing tools.

It has a generous surface, 90×110 mm (3½"×4¼"), which permits a safe and steady positioning of the tool towards the stone.

The bore is made with a special wedge shape, which increases the locking force by 250 %. You can lock the Tool Rest instantly at the chosen angle. This unique design is patented by Tormek.

19.26 23.11


Quantity:  






Tormek Sharpening |  Tormek Sharpening Jigs



Tormek Sharpening Jigs
Buy online at www.tormek-sharpening.com with FREE mainland UK delivery for all Tormek Products



Tormek Sharpening Homepage
checkout
  View Basket
Tormek Sharpening UK Delivery
Free UK Delivery